WR Retrievable Bridge Plug Coiled Tubing Setting Instructions PDF E-mail
Completion Tools - Bridge Plugs / Cement Retainers

Operating Instructions

WR Bridge Plug Coiled Tubing Installation PDF | Embed


This guide aims to provide a short and simple instruction for jointed or coiled tubing installation of the Evolution Oil Tools WR Retrievable Bridge Plug.


WR Bridge Plug - Exploded Diagram


Note icon The illustration above is intended as a guide only.


Hydraulic Setting Tool

Step 1

The procedure for setting the WR in jointed or Coiled Tubing is the same as the wireline set procedure except you must use a Hydraulic Setting Tool to initiate setting of the plug. Sufficient tubing pressure must be applied to set and release from the plug.


WR Bridge Plug Installed

Step 2

After reaching maximum applied pressure it is sometimes required to pull a small amount of tension to release from the WR plug.



Fill out my online form.