Error
  • The chosen template couldnt find on the filesystem: Evolution Oil Tools

EFWG Blanking Plug

Pressure equalization assurance with by-pass design
Description

EFWG Blanking Plug Technical Data Sheet

EFWG Blanking Plug
Product Data Sheet

EFWG Blanking Plug Brochure

EFWG Blanking Plug
Brochure

Pressure equalization assurance with by-pass design

 


Applications

 

  • Selective zone isolation
  • Setting hydraulic packers.
  • Testing tubing by bleeding pressure from above
  • Isolation of tubing for wellhead repair or removal
  • Snubbing in and out of the well

Features

 

  • Plugs are run in the by-pass position, assuring pressure equalization.
  • Normal wireline tools and techniques can be used to run and pull plug.
  • Integral union top thread provides installation ease and flexibility with coiled tubing equipment.









EFWG No-Gos

Our EFWG Blanking Plug is a positive blank-off, top no-go tool designed to be run into an EF Landing Nipple or an upper sub of an EL or SLFU Sliding Sleeve. It holds pressure from both above and below. Conventional wireline tools and techniques are used to run, set and pull the blanking plug.

The EFWG is designed to be used with a removable mandrel for equalizing pressure.

 

Operation

 

While running in the hole the equalizing mandrel is in the lower position, allowing fluid to bypass through the ports on the bottom sub. When the plug is located and set into the nipple, the mandrel is moved to its upper position, thereby blanking off the ports and providing a complete seal. The equalizing mandrel is kept in position by shear pins.


Running and Setting

 

  1. Pin the plug to the Evolution EC-1 Running Tool and attach it to a normal wireline tool string.
  2. Run into the hole until the no-go shoulder on the lock mandrel locates on the top of the seal bore of the nipple.
  3. Pull upstrain to verify that the dogs are locked in place.
  4. Jar up to shear the lower shear pins on the running tool. Continue upstrain until the mandrel has moved to its full up position.
  5. Shear the upper shear pins on the running tool. Pull the EC-1 out of the hole.

 

 

Equalization

 

It is imperative that the plug not be pulled until pressure on both sides of it is equalized.

The procedure is as follows:

 

  1. Run in with an ERB Pulling Tool and latch onto the fishing neck.
  2. Jar up to shear the plug’s shear pins and remove the fishing neck and mandrel sub-assembly.
  3. Allow sufficient time for the pressure to equalize through the equalization ports.

 

Pulling Procedure

 

  1. Run in with an ERB Pulling Tool with an attached EB Probe.
  2. As the pulling tool latches onto the lock mandrel fishing neck, the probe collapses the dogs. Once the dogs are retracted, remove the plug from the nipple by upward jarring.

 

EFWG
Plug No.

Plug
Size

Nipple to Fit
In

Nipple to Fit
Through

Dimension 'A'
(No-Go Shoulder)

Dimensiion 'B'
In

-

1.18

1.18 EF

1.25 EF

1.240

1.177

-

1.43

1.43 EF

1.50 EF

1.490

1.427

-

1.56

1.56 EF

1.62 EF

1.615

1.552

-

1.78

1.78 EF

1.87 EF

1.865

1.771

100786

1.81

1.81 EF

1.87 EF

1.928

1.802

100787

1.87

1.87 EF

N/A

2.302

2.240

100788

2.25

2.25 EF

2.31 EF

2.365

2.240

100789

2.31

2.31 EF

N/A

2.31

2.31 EF

100790

2.75

2.75 EF

2.81 EF

2.802

2.740

-

3.75

3.75 EF

3.81 EF

3.802

3.740

EFWG Blanking Plug

Evolution FWG Blanking Plug

 

Tags - EFWG, FWG, blanking plug, evolution oil tools, flow control, zone isolation, oil tools, well service tools, oil and gas

 

 

Fill out my online form.