CTR Tubing Rotator

Near maintenance–free production tubing life extension
Description

Applications

 

  • Beam pumping operations
  • PC pumping wells

Features

 

  • Very low maintenance required
  • Simple installation and removal
  • Adds only 6.5" to wellhead height
  • No wellhead modifications required
  • No custom-built tubing hanger required

Benefits

  • Utilizes existing wellhead components
  • Easily converted to 3 1/2", 2 7/8", or 2 3/8" EUE simply by changing the mandrel
  • Works in temperatures up to 200 degrees Celsius
  • Abnormal pump wear reduced
  • Sand build-up in pump barrel eliminated
  • Enhances corrosion inhibitors
  • Prolongs tubing life 6-10 times
  • Paraffin build-up eliminated in most cases
  • Rod hang-up eliminated in most cases

Patent Information

 

  • US - 5,964,286
  • Canada - 2,254,480

The Evolution CTR Tubing Rotator was developed as part of a system primarily designed to extend the life of production tubing in beam pumping and PC pumping wells.

 

Using a Tubing Rotator can extend the life of down-hole tubing by up to ten times in certain circumstances; by equalizing the tubing wear around the entire ID of the tubing instead of wearing through in a single spot.


Operation

 

The Evolution Oil Tools CTR Tubing Rotators are available with three (3) drive options:

 

Manual Drive

The Manual Drive System allows the operator to rotate the tubing string on a periodic basis (typically daily or weekly).  This system is typically used with progressive cavity pumps.

 

Mechanical Drive

The Mechanical Drive System is used with pump jacks.  This system can be set up to allow for approximately one revolution of the tubing in a 24 hour period.

 

Electric Drive

The Electrical Drive System is used with progressive cavity pumps that have an electrical surface drive.  The drive system is run by an explosion-proof 220V motor.  This system rotates the tubing string approximately two times during a 24 hour period.


*Custom Sizes also available by request

 

CTR Tubing Rotator

 

CTR Tubing Rotator

 

 

 

Configurations

Well Diameter

(in/mm)

Casing Weight

Description

Item Number

7"

(177.8)

2000#

Studded Rotator CTR 7 1/16 x 2000#

102575

Bolted Rotator CTR 7 1/16 x 2000#

102576

Studded Rotator CTR 7 1/16 Double Drilled

104116

7"

(177.8)

3000#

Studded Rotator CTR 7 1/16 x 3000#

102577

Bolted Rotator CTR 7 1/16 x 3000#

102578

5000#

Studded Rotator CTR 7 1/16 x 5000#

104273

Bolted Rotator CTR 7 1/16 x 5000#

104272

9

(228.6)

2000#

Studded Rotator CTR 9 x 2000#

104141

Bolted Rotator CTR 9 x 2000#

102579

9

(228.6)

3000#

Studded Rotator CTR 9 x 3000#

102909

Bolted Rotator CTR 9 x 3000#

105048

 

Tags - CTR Tubing Rotator, oil and gas, Evolution Oil Tools, tubing rotator, tubing rotator, beam gas, PC pumping wells, artificial lift

 

 

Fill out my online form.